[1gr8bldr]

Can I bottom out the limb bolts on an old style 17 Titan 2 for max weight?

 

[j-san]

AFAIK, you can turn in the limb bolts on a ILF riser to max out the preload, but it is a good idea to back them out 1/2 turn from snug to prevent any binding.

 

[petew]

Trad Tech used 2 types of bushings. The old style was straight and had to be backed out 2 turns for the max weight setting. The new style is longer and has a small flange on the bottom of it. These can be turned in snug for the max weight setting.

 

[1gr8bldr]

Trad Tech used 2 types of bushings. The old style was straight and had to be backed out 2 turns for the max weight setting. The new style is longer and has a small flange on the bottom of it. These can be turned in snug for the max weight setting.

I will take a pic tomorrow. Can you tell me which I have?

 

[petew]

If it is a straight smooth sided tube over the bolt it is the old style.
http://www.tradtecharchery.com/tradtech-bronze-limb-bolt-collars.html

If it has a small flange on the bottom of the tube it is the new style.

http://www.tradtecharchery.com/tradtech-flanged-ilf-limb-bolt-bushing.html