Trad Talk Forums banner
1 - 5 of 5 Posts

·
Premium Member
Joined
·
12,824 Posts
Discussion Starter · #1 ·
GOt a friend with a new-to-him Rambo riser.
His DL is 31".
He is going to buy some Black Max to go on it.
WHO has BLACK MAX limbs on a Rambo?
Tell what they are marked, and what they scale on the Rambo, and where the limb bolts are set.
Thanks in advance.
 

·
Registered
Joined
·
2,355 Posts
Steve I ran the TTBM 40 longs I got from you on my Rambo(come to think of it, I got that from you too!) last Saturday at an ASA qualifier. They were tightened to snug -1 turn and pulled ~ 43/44# at my 29 1/2"-30" draw length. Using a 12 strand 8190 it put a 350grain arrow through the beams at 195...
 

·
Premium Member
Joined
·
12,824 Posts
Discussion Starter · #3 ·
thanks MICHAEL, so 40s got you 43-44 with bolts out one turn from lightly snugged, at 29.5-30" DL.
Excellent, so 35s should get 38-39 following that all-being-equal process.
Then if a guy had the 31" DL he might be legitimately adding 3# to it.
That would make the 35s more like 41# or so.
Thanks again.
 

·
Registered
Joined
·
2,355 Posts
At 31" he might have to back out another turn, turn and a half but he'll have a sweet shooting rig. Mine was juuuussstt starting to stack...
 
1 - 5 of 5 Posts
Top