Trad Talk Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
So I have a 15" Dryad riser in the mail and I'm looking for limbs. Tell me about target limbs rated for 25" riser, will my 29" DL cause too much stress on these limbs. From my rudimentary understanding, 35lb limbs will go to 45lb and then add another 3 for my draw length. So now a 35lb limbs is being asked to hold up to 48lbs. Is this a none issue or am I stuck with limbs based on 19"?
 

·
Registered
Joined
·
79 Posts
It's a non-issue. I'm sure you'll get some very detailed information on why and how all this works but unless you're going with very short limbs on a short riser with a gorilla DL the limbs are going to work. So short, unscientific answer, non-issue.
 

·
Registered
Joined
·
8,952 Posts
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top