[Fatboy]

I bought my son a tradtech apex riser. It shoots great for him but it has a buzz after the shot or if you bump the riser with the side of your hand. I took the detent and spring out of the fitting but that wasn't it. The limb bolt locks are tight and the limb alignment screws are not loose. I cannot figure this one out. Any help would be appreciated.

 

[JParanee]

Call John wert up he has dealt with all and every issue you can think of and might be able to make some suggestions

 

[Wirrex]

First make sure everything is tight. The locking bolts sometimes come loose. If it is still making noise then Teflon tape all the limb bolt threads. That subdued the buzzing on my titan.

 

[Fatboy]

Thanks for the tips. I'll contact tradtech if the teflon tape doesn't work.

 

[JParanee]

Fat boy

I just remembered

The sleeve on the Ilf bolt can rattle and cause a buzz

 

[Fatboy]

Thanks I'll check that out too.

 

[Wirrex]

Fat boy

I just remembered

The sleeve on the Ilf bolt can rattle and cause a buzz

JP that is exactly what mine was doing! I taped it and it hasn't been a problem for months now.

 

[JParanee]

JP that is exactly what mine was doing! I taped it and it hasn't been a problem for months now.

Same on my Morrison

 

[Fatboy]

Thanks for the tip fellas. The teflon tape under the bolt sleeve did the trick. Quiet as a mouse now.

 

[j.conner]

Make sure the limb bolts are snug. Mine rattles as you describe if they are loose.

 

[stevelong]

Glad you got it quiet, no one likes a rattler

 

[SteveInNJ]

Added to my mental Rolodex for future problem solving! Good post.