Joined
·
1,638 Posts
After waiting forever for Lancaster to get around to machining some so I can fit lighter limbs to my Hoyt GM2, and following advice from this forum - it's really dead EASY for non-handy guy like myself.
Got the bushings from ebay:

$8 a pair. They're "Bushing Bronze New 1/4 id x 3/8 od x 1/4lg Brass"
I couldn't find a "G" drill bit, so got a 6.5mm and just needed to hold the bushing with pliers and wiggle the hole to enlarge it slightly. Found a plastic cap to top the hole on the limb top.
My Black Max 25# limbs arrived (they scale at 22.5# at my 27.5" draw) and are now installed... so much happier!! I can really work on my form and digging it!
Got the bushings from ebay:

$8 a pair. They're "Bushing Bronze New 1/4 id x 3/8 od x 1/4lg Brass"
I couldn't find a "G" drill bit, so got a 6.5mm and just needed to hold the bushing with pliers and wiggle the hole to enlarge it slightly. Found a plastic cap to top the hole on the limb top.
My Black Max 25# limbs arrived (they scale at 22.5# at my 27.5" draw) and are now installed... so much happier!! I can really work on my form and digging it!