Trad Talk Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter · #1 ·
If you have a bow tuned to and Axis shaft and you change to say ACC of the same spine and length will the tune remain the same or will the diameter of the shaft make the tune change. Also if you were to change form and Axis to say a FMJ that is heavier would the tune change?
 

·
Premium Member
Joined
·
2,497 Posts
Both.... arrow diameter affects center shot adjustment and arrow weight affects dynamic spine. how much of an affect depends on how forgiving the bow is and how close to ideal tune you are (kind of the same thing, really). If you are on the edge of acceptable tune then a small change may send the arrow whack-a-do. If one is not very good and the bow is perfectly set up then the difference might not be noticeable. Basically, it depends....

Rasyad
 

·
Registered
Joined
·
2,359 Posts
What Rasyad said. I know of only one way to find out. Well, paper, BS planning, BS tuning, broadhead tuning. RETUNING.

All that said, if you're shooting .500 and change to another .500 you're very close to where you want to be. Maybe a little change in brace height should do it. Unless you change from a skinny carbon to a 23/64's wood.

Bowmania
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top