[brokenarrow]

I want to shoot my original Das off the shelf and want to get an adjustable side plate like the one that that is on the Dalaa riser. I looked in the 3 rivers catalog and couldn't find it listed. Any one know where I can order one? Thanks. Bob

 

[John in NZ]

Martin makes an adjustable side plate that will fit the DAS.

I've seen it listed on Lancaster archery's web site under the arrow rest/plunger section.

John.

 

[stevelong]

It's a part of the DAS repair kit.
If you call & get a tech, they will split it out for you, it will likely be free.
http://www.3riversarchery.com/DAS+Bows+Dalaa+Riser+Repair+Kit_i8174-2_baseitem.html

 

[ivorycollector]

Just get a Counter Sunk 5/16 x 24 x 1/2" bolt and attach velcro on the bolt face. Lock with a grub screw of same thread.

 

[longrifle346]

Get a countersunk screw long enough to go all the way through and use a hacksaw or Dremel to make a straight slot on the threaded end. Velcro the screw head, back it up with a locknut on the other end, and you've got an adjustable side plate that allows you to use a small screwdriver to tweak it.

 

[JLyle]

Shoot me a PM with your mailing address. I've a new one from a repair kit that I only needed the thumbscrews out of. You are welcome to it. James

 

[brokenarrow]

Thanks James. Sent you a pm. Thanks again