Trad Talk Forums banner
tube
1-7 of 7 Results
  1. Hunting Camp
    Was dialing in my 47# Predator recurve. This bow is super picky about brace height. Was louder than normal. So I got my brace height right at 7 5/8. Was shooting good . But a little twangy. Took my beaver balls off, replaced them with 3/8inch strips of inner tube. Quieted the bow down quite a...
  2. TradTalk Main Forum
    Has any tried the NAP spin vanes already attached to heat shrink tube. You just put it on a arrow and dunk 10mm secs in boiling water?
  3. Hunting Camp
    Who uses them? Tips on how to use one or how to position the latex?
  4. TradTalk Main Forum
    I'm finally dabbling with carbon arrows. One of my concerns was cutting them to the right length. It seems like a high speed saw is recommended. Rather than buying another tool or fixturing a Dremel, I decided to experiment with a scrap Carbon Express. I wrapped some masking tape around it, and...
  5. TradTalk Main Forum
    Does this work as good as wool string wraped around the ends of the string, or better?? Any performance loss or ill effects? I like the sounds of this and would like to give it a try with the endless strings I have been trying to spin. Thanks Chad
  6. TradTalk Main Forum
    Does anyone know where to get some small shrink tube? Small enough for the spring rest or a flipper arm. I used to buy it from goldenkeyfutura but since they went out of busness I need to find some more and get restocked. Going to try the WD40 spray tube but past experiances it doesnt like to...
  7. TradTalk Main Forum
    Here is my first attempt at a tube quiver, along the lines made by James. Thanks James for the help. This one is 3" PVC. I am currently making one with the map tube as James does. I used one of these for the last few hunts of last year, and liked it. They are pretty easy to make. Cato
1-7 of 7 Results
Top