Trad Talk Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-16 of 30 Results
  1. TradTalk Main Forum
    https://earlyhuman.co/ TUNING FORKS Recurve Limb plane Alignment Toolset Am thinking of getting some, wondering if anyone has used them and how well they work for aligning limbs/riser.
  2. TradTalk Main Forum
    I need to buy new blades for this tool. But I think likely this company is out of business. I ordered some replacement blades for the True Center v2 tool but they are definitely the wrong size. I tried taking the blades off and sharpen them by hand but it still does not cut very consistent...
  3. TradTalk Main Forum
    These things run about $100. Do any of you use one to setup centershot. It seems like a good investment for tinkering with different limbs and risers.
  4. TradTalk Main Forum
    I am interested in giving a go at building quality wood arrows. What are the options out there for Barrel Tapering jigs/tools. I have seen the Tim's Taper Tool. Are there any other options?
  5. TradTalk Main Forum
    Ive got a thompson fletching tool made by hawkeye feathers in salem oregon. Does anyone have instructions for it out there?
  6. TradTalk Main Forum
    I picked up a Bohning serving tool(same as cartel and BCY 26) at my local sporting goods store. I was needing to reserve the center serving on my recurve. I was having a hard time with the tension. I would get it set about right and after 3 or 4 revolutions it would either get to tight or get to...
  7. TradTalk Main Forum
    I recently bought a used Border riser, but i see it must need a special tool for the limb bolts, not the standard hex head, anyone have one they dont need anymore. Is there a place to buy one, besides Border Bows, long ways to send just a wrench. Thanks Dave
  8. TradTalk Main Forum
    There was talk about a tool like this in a recent thread. http://www.fcainnovativearcherytools.com/ Plunger Tester, allows to set up perfectly your Plunger with a new one, or to facilitate the set-up of your actual Plunger, and test its functionality effective analysing the load of the...
  9. Watering Hole
    I'm tired if using disposable soldering irons, what do you get the most mileage with? I'm also looking into some tools for my guns. I see some offerings from the box stores, which get mixed reviews, but I just need a good kit to do general maintenance with. Your suggestions?
  10. TradTalk Main Forum
    I have a Bearpaw serving tool and I just bought a second one. The first one as a rubber grommet on the axle to act as a breakpad, but the new one does not have one. The place I ordered it from looked at another one they have and it also does not have the rubber grommet. So my question to...
  11. TradTalk Main Forum
    Seems like a good idea, having both ends of the arrow shaft square to allow precise installation of the point and nock. Anyone take this extra step with a tool like this?
  12. TradTalk Main Forum
    I am not sure where else to ask this. (MOD: If there is a better place feel free to relocate it.) I have several expensive carbide burr bits for my Dremel grinder that have gotten clogged with aluminum. My buddy mistakenly used them for bulk aluminum removal on the airplane we are building. I...
  13. TradTalk Main Forum
    okay so my new arrows should be here tomorrow or the next day and I forgot to order a 11/32 tapering tool, my teacher has one but dont want to wait another week to start shooting! only place around here with bow stuff is gander and dicks and they dont have them, is there anyway I can taper the...
  14. TradTalk Main Forum
  15. Watering Hole
    This site will give you latitude and longitude for any point. You can enter the #'s into a gps for future navigation. http://itouchmap.com/latlong.html
1-16 of 30 Results
Top