Trad Talk Forums banner

super

  1. TradTalk Main Forum
    Hi, I am trying to find out some info on my Damon Howatt S/D it has a serial # of ESD 6023...just would like to know how old it is...Thanks...
  2. TradTalk Main Forum
    I just ordered some of these shafts that were on sale.I was wondering if someone had used them and could tell me if they bend as easy as the FMJ shafts?I am running low on my SSTs that I use for hunting and looking a replacement for them in a skinny with some weight to it so thought I would try...
  3. TradTalk Main Forum
    I was wondering if any one could point me to, or tell me what the IBO velocity of the 60" 55# Bear Super Kodiak is. Thanks
  4. TradTalk Main Forum
    Super glue...(cryanoacrylate - or CA glue) it's more than just for putting fingers back on after playing with knives that are crazy sharp. It's a fantastic finish that's highy water resistant and very hard. It comes to a clear and brilliant shine that is actually clearer and more brilliant...
  5. TradTalk Main Forum
    I'm trying to figure out the differences between these two rests- the hunter versions, not target. I've noticed a lot of web pages sell both, but often use the same pictures and/or the same descriptions. From what I understand the only difference is that the 'Super' comes with a metal plate...
  6. TradTalk Main Forum
    Does anyone have the official published Easton dimensions for their Super Nock? I'm looking for the throat size, like they show for the "G" Nocks at 0.088" & 0.098".
  7. TradTalk Main Forum
    Recently I bought the CD-Rom of Bear Archery Catalogs. In scanning through them, I was reminded that for several years the Super Kodiaks were offered in 60" and 64" lengths. Then in the last few years of production, only 60" length. I've never seen a 64" Super Kodiak. I even worked part-time...
  8. TradTalk Main Forum
    Anyone know a dealer that carries Super Carbon shafts/arrows? The last ones I purchased were from an online dealer who no longer carries them. I use to have super carbons website but apparently lost it. Anyone?
  9. TradTalk Main Forum
    Well, this morning my XL came in. I had ordered it a week or so before the price increase. David Quinn called me last week to ask some questions about the bow, then called me this past Wed. to say it was shipped out on Tuesday. This is the ultimate in customer service as far as I'm concerned...
  10. TradTalk Main Forum
    Anybody remember those things? From what I read, they were supposed to be the answer to any release problem you could ever have. What was the real story? How were they supposed to help? Cato
  11. TradTalk Main Forum
    Okay, I've built a couple "super targets" for myself now...simple wood frames, chicken wire, old carpet scraps for covers, stuffed with supermarket plastic bags...like 'em...but I'm wondering if astroturf or old plastic seed/feed bags would be a better covering for them... Now that I started...
  12. TradTalk Main Forum
    Okay, trying to push the envelope with FOC this morning...shooting Easton Lightspeed 340's cut to "30...weighing in at 266 with fletch and nock...adding 100 grain brass inserts and 250 grain field points for a total of 616 grns... ...shot out of a [email protected] slight reflex longbow... Arrows were...
  13. TradTalk Main Forum
    Does ordinary super glue stick to carbon arrow shafts?
  14. TradTalk Main Forum
    Just when you thought it was safe to make strings again....... Made another jig and I like it. The main pipe is 1.5" electrial conduit fastened to a 16x10x1.5" board. On each end is a piece of boat dock hardware that slides on the pipe. Because of the welding done on the hardware, it was...
  15. TradTalk Main Forum
    Archery season ended the 16th here (learned a ton, got within 60 yards of Elk half a dozen times but never got a decent shot opportunity until too dark), so I finally had a chance to snap in my 62# carbon limbs... Oh my!! It's a whole new dimension of speed! Reminds me of the first time I...
  16. TradTalk Main Forum
    From what I know (I think) the DAS is machined out of the same alloy jet landing gear is. If that is so, I watched that jet land today that had its front landing gear stuck down and sideways. THAT IS SOME TOUGH STUFF! Tires caught on fire and were wore off the rims during the landing and the...
  17. TradTalk Main Forum
    Here is a picture of the new warf/hank super server MarkII. Warf sent me one of his servers and I took his brilliant technology and added a couple of tricks. The main bar is a piece of 3/4" by 1/8" steel, 5" long. Make a mark 2" in from the end and bend it at a 90 degree angle there. Measure...
  18. TradTalk Main Forum
    I recently had the pleasure of shooting with Dale Dye of Trail's End Recurves. In my opinion his Medicine Point Bows are the most beautiful customs I've ever seen, really works of art. Too bad they're five times what I can afford... Anyway, he was shooting these super skinny carbon shafts...
  19. TradTalk Main Forum
    When ideas hit, you just have to act on them. Figured I make a lighter less complicated string jig. Used the 1.5" conduit only on one end and kept the other end fixed. Used dock hardware to slide over the pipe. At TB4U's comments, went to 1.25" dowels. The pipe also acts as a handle in the...
  20. TradTalk Main Forum
    opinions?! while out looking for more information on the other bows i was interested in..i got a killer deal on a '02 bear super kodiak...waiting for pics but i've never shot one...for those of you who have...how does it feel? it's 50#'s which is butter compared to what i was shooting...is it...
Top