Trad Talk Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 24 Results
  1. TradTalk Main Forum
    Ever notice that sometimes if you picture in your mind the exact shot you're going to make, that you'll make that exact shot? Beyond aiming, and beyond the mechanics of form, there's something in mental imagery. Not sure there's been much discussion or study into that but there's something...
  2. TradTalk Main Forum
    I've been shooting the same .500 spine arrows indoors that I use outdoors for 3-D. The bows are different weights , 36# and 43#, but oddly they fly great from both bows. I did have to change the points from 125 gr 5/16" standard field point profile to 125 gr. 9/32" with bullet profile for indoor...
  3. TradTalk Main Forum
    Hej Guys, I am playing first year with barebow and string walking, after few years in the instinctive WA category.. I am getting little strange tuning results, so I would like to consult with you if anybody had experienced similar results. My set-up: - Gillo G2 riser with SF Elite long limbs -...
  4. TradTalk Main Forum
    Im stumped on this one and cant sort it out. Ive had issues with opposite tuning results for awhile now, but always managed to get something to hit down the middle. By opposite I mean weak arrows hitting right and stiff arrows hitting left (Im left handed). This pertains to fletched mainly, but...
  5. TradTalk Main Forum
    OK, I have 30# limbs and 40# limbs for my Samick Journey. I go back and forth between them a little. but right now am using my #30s to work on form stuff. I was thinking, it would be cool to have something better than a plastic bag to store my extra limbs in, and then I saw this low end riser...
  6. TradTalk Main Forum
    Hi all Being new to trad archery and looking for limbs for a Morrison riser I was wondering is there a significant difference between target limbs and those marketed as hunting limbs? ( given the same materials in both...Apple to Apple?) Regards mark Sent from my iPad using Tapatalk
  7. TradTalk Main Forum
    You guys that dont put them all in the X every shot ever notice strange patterns in your groupings? When I shoot 3 arrows I always have 1 and 2, meaning 2 will group and 1 will be a flyer so to speak. I dont have my arrows numbered, but have taken one out and swapped it for a "new" one only to...
  8. TradTalk Main Forum
    I'm in the process of testing various "fat" shafts for indoor 18Meter FITA with bare bow. I have been through Fat Boys, Carbon Express CXL 150, X7 2314, 2312 and 2311 all with pretty good results and no big tuning problems though some are a little stiff for me. Now I wanted to try X7 2212...
  9. TradTalk Main Forum
    While playing with my intended hunting bow, hex 5 med on 17 DAS riser, I was trying to get more speed. I turned the weight up app 4 pounds. Strange thing though, lost my grouping, most arrows going right. Not to surprised by that. But I am getting the same exact speed. So I started backing off...
  10. TradTalk Main Forum
    I shoot my worst when I over draw. Makes me shoot high. So I try hard to make sure I don't pull farther on the shot. I realize that you guys do just the opposite. You try not to short draw because it makes you hit low. I suppose that my groups may be equal only that my "system" is based on me...
  11. TradTalk Main Forum
    A friend of mine wanted to get into Trad Achery and said he had two bows given to him 25 years ago. Pic's are attached. Thay have very massive risers. One 6" across. One says "dyna stressed". No manufacture name. They are 69" 34 and 37 lbs. They shoot great , however they weigh a ton. Bow were...
  12. TradTalk Main Forum
    This is something that has bothered me for a while but I never have asked about it before. On all my recurves, I get wear on the very left edge of my arrow shelf that's pretty severe. For example, if I put new material on my shelf, it will wear the top layer of soft material off within about...
  13. TradTalk Main Forum
    Hey guys, Dont chastise me from the forum because this is a compound design....BUT!...I've never seen such a bow in my life and it's very interesting. Thought I would pass it along!
  14. TradTalk Main Forum
    Ok, here's the scenario... You have two bows, one is a one piece and the other a take down... Both limbs on each bow are made of the exact same material and have the exact same brace height and draw weight shooting the same weight arrow in an indoor range and draw length is anchored at 28"...
  15. TradTalk Main Forum
    I noticed while shooting today that my 2 fletched arrows are hitting about a foot higher than my 3 fletch ones. The 2 fletch have some extreme helical, and the 3 fletch are normal offset(2 degrees). Other than that they are exactly the same. Same shaft(GT Ultralight Entradas), length, point...
  16. TradTalk Main Forum
    I've been out west and have not shot for two full weeks. While away I hit an archery shop and the owner let me use his tab and bow. (a VERY nice Morrison with new limbs) His tab had a cordovan face. I shot very well in what time I was there so I bought one of his tabs. So once I get home I try...
  17. TradTalk Main Forum
    What's this attachment? For a quiver?
1-17 of 24 Results
Top