Trad Talk Forums banner
removing
1-15 of 44 Results
  1. Warfin' Wall
    Good evening! I wanted to see what is the best way to strip paint from a bow riser (original paint) in order to paint it up. I’ve seen where folks have used Airplane Stripper. Seems like nasty stuff for sure. I’m working on a Bear Black Bear Riser and a Hoyt Spectra.
  2. Warfin' Wall
    I have this old Browning Drake Flightmaster that I no longer use. I want to warf it. Here are the steps I see I need to do with questions. 1. Remove existing limb bolt inserts. How do I do this? 2. Cut riser limb pads to 18 degrees 3. Install ILF hardware. No questions on this part yet. Am I...
  3. TradTalk Main Forum
    I want to replace an ILF bushing in one of my sets of limbs. I am wondering what the best way is to push the old bushing out. It is very tight and I hate forcing things until I know what I am doing. Also, is there a good way to push the new one in?
  4. TradTalk Main Forum
    Got a set of Border Hex 6 that I've come to love....but I could sure do without the NatGear dip job that was done on them. Don't know who did it but the quality of the finish is less than appealing. Has anyone ever successfully removed a dipped finish before?
  5. TradTalk Main Forum
    Ok I've read many threads on how to prep and paint/bed liner a riser. Now the twist On a bare aluminum riser or anodized riser, without prepping the riser or scuffing the surface how hard would it be to peel bed liner off of the riser? Painting you can scratch it off with stiff plastic or a...
  6. TradTalk Main Forum
    Is there a simple or recommended way of removing the brass crimp on nock points from a string? Through buying and selling bows I've acquired a few strings that have them and I want to get em off with out damaging the string or serving. I'm sure there must be a tool or a way for it. Thanks!
  7. TradTalk Main Forum
    I have a riser with a chrome plated back weight. I can not get the weight removed by had. What Can I use to remove the weight with out marring the chrome? No flats to put a wrench on unfortunately. thanks in advance dave
  8. TradTalk Main Forum
    I spray canned some flat black camo paint over what I believe to be Dura Coat (also black). Now I'd like to remove it. How can I do it without messing up the original layer of Dura Coat? The new paint seems to scratch off easily with my fingernail. I'm thinking fine steel wool. The reason I...
  9. TradTalk Main Forum
    Got these Hex5h limbs used, they are in good shape except the finish is flaking off. As you can see this is occurring mainly where the limb savers were which actually came off with the finish, but now the finish is continuing to flake off. I know Border will refinish for $125 + overseas...
  10. TradTalk Main Forum
    I traded for a bow and did not know it had and arrow holder stuck to it. I did not see it in the pictures of the bow before I traded. Not a big deal but I want to remove it. It appears to be the self adhesive type. What "Solvent" would you use to remove the sticky glue and not damage the...
  11. TradTalk Main Forum
    Okay I'm trying it here. Put this in the wrong forum. :( I have an early 1970s 70# Kodiak Hunter that the original owner put an arrow holder on. The arrow gripper has been removed but the rest of it is still glued to the riser. So what would be the best way to remove this ugly black wart off...
  12. TradTalk Main Forum
    As per title. What do you use to remove the branding from carbon arrows. I have tried thinners but no joy. Thanks
  13. TradTalk Main Forum
    I am looking at a bow that has been dipped. The camo pattern just does not work for me. Initially I passed on the bow, but now I am thinking about removing the dipped film. In stead of redipping the bow I am thinking about taking the bow back tot he original finish. Has anyone taken an...
  14. TradTalk Main Forum
    i was brainstorming today and remembered that one of my friends whose a bowyer all his self bows have 2-3" of string follow in it so i was wondering if i put one in a bowpress(i own one) and crank it down ever so slightly and let it sit in the press removing the string follow and adding a tad...
1-15 of 44 Results
Top