Trad Talk Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. TradTalk Main Forum
    I shot these for a long time and really like them. I am finally getting low on my inventory of 500 and 460's. Anyone know a source for these. Need at least 30"
  2. TradTalk Main Forum
    Rusty gave us a dozen Redline 520s but they have nibb points and are a bit stiff. We'd like to convert to inserts and screw in points to tune easier. What insert fits the 520s? Mike
  3. TradTalk Main Forum
    does anyone know what size insert these use,i dont know if there the acc,acs or what
  4. TradTalk Main Forum
    Since Easton has discontinued the Redline arrows, what is a good replacement. Need the thin body for what I am shooting. Finally found a set of 460 full length that work, but thru attrition and down to three. Dang! Erich
  5. TradTalk Main Forum
    i put some SF gold standard foams 28# mediums on a 19" riser. Sometime ago I picked up some redline 900 from the tradeblanket. had five of them fletched with 4.5" shelids cut 28" and a target nib. I have no real idea with they would spine out for. I picked them up and went out back with the...
  6. TradTalk Main Forum
    Do any inserts other than the halfouts fit redline 600 shafts ? $19.00 a dozen seams a little pricey to me ?
  7. TradTalk Main Forum
    I'm going to purchase some Redlines. If possible I'd like to buy one size that will work for my target AND hunting rig. Target rig: Winstar II with KAP carbons, currently at 36# @ 30", shooting 1916's w 125 g points (600 spine) plunger and flipper rest Hunting: Provantage warf with Quinn...
  8. TradTalk Main Forum
    Hello: Can anyone suggest a correct spine for Easton Redline arrows? Warf bow, ~50 pounds at 30 inch draw length. Thanks
  9. TradTalk Main Forum
    What size alum. shafting do I need to foot Redline 410"s. What size for Redline 460"s.
  10. TradTalk Main Forum
    I would like to know if Easton Redline arrows have the same inside diameter of Beman ICS 400, so I can use the same unibushing. I would like to change SuperNock for uninocks.:help: Thanks Martin
  11. TradTalk Main Forum
    I just got a warf, and I'll probably be looking at 400 Lightspeeds or 410 Redlines, mostly for 3D. According to the catalog, it says the 410 Redlines are 5/16", while it states that the 400 Lightspeeds are 9/32". Is that correct? I noticed that it says the Redlines are constructed of "C2...
  12. TradTalk Main Forum
    I can't seem to avoid my desire to try a light arrow out of my DAS. I shoot a 400 deflection arrow now weighing about 460 gr. with a 125 gr. broadhead. If you shoot or have shot either or both of the arrows mentioned above, please tell me how you like(d) them. I would want to use them for...
1-12 of 12 Results