First, it looks like the Ram Hunter riser is pretty much the same as the Rambo riser.
I understand that the BB plates can be used on the Rambo, but that you have a bit to trim off the end when you do it.
Is there a reason you couldn't use the thinner BB plates without a floor on the Hoyt...
This project started life as a Hoyt/Easton Ram Hunter that I picked up at a pawn shop for $30.
I performed the conversion as follows:
[1] Disassemble bow.
[2] Remove the plastic rockers from the limbs, and cut the locator nubs off with a dremel.
[3] Cut off and drill out the insert for the...
Im waiting for some Ilf plates to arrive for my Hoyt Ram hunter riser. Im thinking about getting trad tech Black Max shorts for the limbs. I want to use this bow for hunting and 3 D shoots. Im going to order 50# limbs. Im hoping they will turn out to be close to this weight give or take 3 or 4...
Looking to get all the info I can on a bighorn ram hunter longbow 60" [email protected]" I am trying to compare this to my thunderstick mag longbow? Plz let me gear reviews and pics if u got em ...thanks jason
My buddy talked me into going on an exotic ram "hunt" with him in Tennessee this spring. I have been to the place before but only for pigs. This time I want to use my hybrid longbow to get some sort of texas dall, corsican or black hawaiin ram. I am shooting 45# @ 27 inch draw. My arrow setup is...
This thread is not meant to start a debate over high fence hunting. I like it from time to time just to get out and have a great time with friends and family. I am heading to Wilderness Hunting Lodge for a second time. We will be hunting April 12-14 and I am looking at taking a ram of some...
Finally, After following Mr Dunham's instructions I finished my first ever conversion, An old Hoyt ram hunter compound bow turned into an ILF recurve. An other interesting fact is that I belive this is the first warf bow done 100% in Mexico. The warf bug is crossing borders and God Knows how far...
Dear warf gurus!
I need your help, I have a hoyt ram hunter riser and some of del's plates for a martin jaguar, do you think these plates can work on the hoyt riser and what other mods are needed? I'm totally new to warfing so any opinions are good help.
Thank you!
I ran over my buddies old hoyt ram recurve on this weekends bow hunt. I dont know anything about recurve bows. Can anyone point me in the right direction to find used limbs for the hoyt ram recurve?
I have a Hoyt/Easton Ram Hunter on the way. I understand it was a recurve riser as well as compound. Ideally I would like to use ILF limbs, but I'm open to Quinn's or generic Samick's.
I want to get 45# +/- 3 at 28". Anyone have suggestions for limbs? I'd like to keep it under $200, less if...
Wondering if anybody knows if these measure at 28" w/ 1.94#
or do they measure at 26" w/ 2.00#? Can't connect to website
to find out. Called a couple of distributers but they had no idea.
Hi Everyone,
I have a old Hoyt Ram Reflex Recurve. It has a metal riser. It is the same riser as the old Hoyt Rambo. I would like some information about the Ram Reflex if anyone has any. Like what is the AMO Bow String Length and what is the recomended Brace Height?
Thank you,
Tim