Trad Talk Forums banner

nap

  1. Archery Accessories
    Looking for a source of the screw on weights to make a 175-200 grn DRT broadhead.
  2. TradTalk Main Forum
    I realize this is not considered a traditional broad head but does anyone have any experience shooting non traditional heads like the TH from a recurve or longbow? Another head I wondered about is the Slick Trick Viper Trick which is actually marketed as a COC head? I have several of both of...
  3. TradTalk Main Forum
    I'm experimenting with rests. I like the execution of the NAP rest. Simple solid design. Not impressed that they didn't continue the threads of the bolt right to the end. Only a few catching on my Titan riser (I've read the flipper model is even worse). I'm shooting Gold Tip Traditional Blems...
  4. TradTalk Main Forum
    I am planning to order a riser cut to exact center (0 center cut), with a plunger hole; and if you would be so kind, I just need a quick piece of information from someone who uses a NAP center rest (not the metal flipper arm version -- the version with the fixed plastic arm). How far does the...
  5. TradTalk Main Forum
    I have two Dorado risers that I use for my hunting rigs. I shoot feathers and also want to shoot Blazers. Boy, those Flipper rests are spendy. I thought about a Hoyt Hunter Rest or a Bear Weather Rest, but don't like putting so much double sided tape to get the shelf built out.
  6. Warfin' Wall
    Has anyone tried a NAP Center rest with their pse silver hawk riser. Not the flipper rest but the center rest. I really like that one(had one on my first bow lol hated the bow loved the rest!) but, would rather not pay to have it shipped back if the bow is not far enough past center to work with it.
  7. TradTalk Main Forum
    When the Centerest Flipper is installed, is the arrow meant to make contact with the plastic "plunger pad" or is the arrow meant to just sit on the flipper wire with no other contact? If I follow the instructions and keep it all level, the arrow slides on the wire to where the bend is and has...
  8. TradTalk Main Forum
    I am trying to set up my DAS for the dual purpose of hunting and 3D. I set it up with a NAP Centerest Flipper and it tuned pretty easy with my bareshafts grouping right with my 3" vanes at 20 yards. However, I could see color on the sight window where my vanes were brushing, even though it...
  9. TradTalk Main Forum
    I've been fletching using NAP Quik Spin vanes for the last six months and more. One of the lads on here kindly sent me a very good selection of 4" Quik Spins. I then bought some at 3" and very recently more at 2". At the moment I'm shooting 600 spine GT Ultralight shafts uncut with three 2"...
  10. TradTalk Main Forum
    Has any tried the NAP spin vanes already attached to heat shrink tube. You just put it on a arrow and dunk 10mm secs in boiling water?
  11. Warfin' Wall
    Has anyone used this rest on their warf ? How did it perform?
  12. TradTalk Main Forum
    Greetings all, I have a NAP flipper center rest and have been scouring the Internet in search of a replacement for the threaded end with the square shaft. I have found a bajillion replacement heads and complete packages but the only thing wrong with mine is the threads are stripped. Would I be...
  13. TradTalk Main Forum
    I've heard that stick on rests don't always stick well to the Blackout finish on Hoyt Excels. What do you all think about the NAP Centerest and Centerest Flippers? I know they have been around for years just never messed with one. I noticed that the Flipper version has a big upward bend at the...
  14. TradTalk Main Forum
    Does the flipper arm move completely under arrow at release? If so does the upturned end of the flipper lift the back end of the arrow? See both straight and upturned styles from manufacturers? Also feathers show signs of wear, but use cock vane on nose for anchor. thanks.
  15. TradTalk Main Forum
    What differences can be expected? Right now I am shooting of a Nap flipper rest, but curious as to what benefits/advantage a plunger rest will give me or not.
  16. TradTalk Main Forum
    So just for giggles, I moved my flipper rest 2 turns out from all the way in against riser where it was set prior. My groups seem to have improved. What did this do to my alignment or arrow spine? How far out can I take it?
  17. TradTalk Main Forum
    Could someone post a couple of photos of their riser[both sides] would be nice of their centerest flipper.Just seems like i have way to much bolt on the opposite side and would like to compare pics. with someone who has this rest,my bow is GM1.Thanks,Rich
  18. TradTalk Main Forum
    There have been several threads recently on this rest and some questions on how to shorten it. This wasn't my idea I believe I read it here in the classics section but, I have never seen pictures on it and can't find the original thread - as we all know a picture is worth 1,000 words. Pic #1 -...
  19. TradTalk Main Forum
    I'm sure this is a dumb question.But how do you install one of these.A friend gave me one.But there was no instructions in the pakage.It looks like the head screws off.But i dont want to break it.I've been known to do that sorta thing.LOL
  20. TradTalk Main Forum
    Is the bleeder blade removable?
Top