Trad Talk Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 29 Results
  1. Bows
    I'm trying to help a friend find a replacement fitting (or pair) like the one in the attached photo. He lost the cap screw, spring, and plunger from his other fitting and would like to find replacements. Please send me a PM if you can help him out. Sent from my Moto G (5) Plus using Tapatalk
  2. TradTalk Main Forum
    a friend is trying to use some older Hoyt Pro Medalist limbs on an ILF riser. These are thicker & flat butts, no rockers. Mine are .732" at limb fitting hole, & my Winex is more like a tad under .6". WHo makes ILF fittings that are longer than normal? like by a tenth & a half. I KNOW - could...
  3. TradTalk Main Forum
    I read somewhere here David Sosa's explanation of how to swap out limb fittings. I can find a video of about anything on You Tube but nothing on this. No one has made a video of swapping the fittings out? Thanks, Dean (show me don't tell me) Daniel
  4. TradTalk Main Forum
    I ordered a set of DAS fittings from 3Rivers so I could use my Samick Masters longbow limbs on my Dalaa. I noticed they looked a little different than the older sets I have. They are also about 1/10" shorter than the older ones. Anyway, I installed them in the limbs and tried to mount them on...
  5. TradTalk Main Forum
    Hi I have some samick limbs , what are these fittings called. are there any aluminium riser that would work with this? Are they ok or should I get better ones? can these limb be moded for ilf? What kind of string and string length should I use
  6. TradTalk Main Forum
    I can't find ilf fitting anywhere I would like the ones "Man" was making. But would b happy with some brass ones where does one find them. Lancaster is out. "they" don't know how long for. Anyone have any they don't need. Tommy
  7. TradTalk Main Forum
    Hi, I'm just buying a 21" Dalaa riser. I'm worrying about getting ILF or DAS fittings on it. What would you recommend? I don't mind changing out limb fittings but I've got other risers and I don't want to have to sand or modify my ILF limbs in any other way. I want to be able to jump from...
  8. TradTalk Main Forum
    SO I deceided to buy a DAS recently, it wll be here Wednesday. It is a 21" riser and medium limbs, bought it from FTJOY on here. My question is how hard is it to make ILF limbs DAS compatible? Or is it possible to make the riser ILF compatible? WHat is the best course of action here as I have...
  9. TradTalk Main Forum
    I recently ordered a set of Dryad Epic recurve limbs to use on my 17" Dalaa. I need to order a set of fittings for them but I'm not sure which ones to get. Should I get the Hoyt/Korean version or the longer Border ones?
  10. TradTalk Main Forum
    Could someone please tell me the recommended mid position for the limb bolts on a 21" Dalaa? Thanks, Bob
  11. TradTalk Main Forum
    Here's a tip to remove the fittings on ILF limbs that is quick and easy. If you have a drill press, get a bit that is the same size as the barrel of the fitting, or slightly smaller. Place the limb on the work table, with about 1" of clearance between the bit and the top of the limb. Then gently...
  12. TradTalk Main Forum
    I haven't done this before so I thought someone might give me some instructions. I need to take das fittings out and install ilf fittings in the limbs. Thanks
  13. TradTalk Main Forum
    I hate the shinny chrome bolts on the ILF limbs what can I do with them? Can I get a fitting that isn't so shinny? I have never replaced fittings before but the shinny piece looks just like a simple bolt. Could I just go to the hardware store and find a black replacement? Thanks
1-14 of 29 Results