Trad Talk Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 34 Results
  1. Archery Accessories
    Anyone know where I can find these for my ILF riser elevated rest set up? Has 6-32 threaded hole in end and need to find some more somewhere? What are they called? Thanks.
  2. Bow Projects
    Finding and measuring pad limb angle and deflex? I going to build a wooden ILF riser and want to confirm how to measure for limb angle and deflex. Soooo I'm thinking that I could take an existing riser and lay it belly side down on a flat surface and using a bevel guage take the angle of the...
  3. TradTalk Main Forum
    Hi all, I’m new to bare bow, and I have a set of short Limbs. Well made, and high quality. I thought we’re going to be perfect poundage, but they’re slightly too heavy for me to hold long on the Target. I want to get another set… But how do you decide on what to buy unless you can try them...
  4. TradTalk Main Forum
    I am new to traditional archery and I have been loving it since I bought a recurve. I've been reading up on so much stuff that I am starting to get a head ache. Here is my question. I know that PERFECT ARROW FLIGHT and ACCURACY trumps all else, but what is your opinions about arrow selection for...
  5. TradTalk Main Forum
    Does anyone know where I can order a Spigarelli Zero Tolerance Arrow Rest from. Lancaster has been out of stock for a few months and I got a WFX25 XLite ready to start shooting........... minus arrow rest. Figure some of you guys may know another supplier in CONUS
  6. TradTalk Main Forum
    and arguably unproductive to hold this bow at full draw for any longer than it takes me to hit anchor and acquire the appropriate sight picture and?... I think this may be why...16.32 ounces...
  7. TradTalk Main Forum
    I updated to some hex6.5w limbs a year ago and across several risers never quite thought I got the most out of them vs my standby CV limbs which regardless of riser tuned easily and delivered stable fast performance. I recently traded for a Hoyt GMX riser and this is the first riser that for me...
  8. Bow Projects
    Hello all, I am building my first set of arrows. They will be wooden footed walnut and pine. My question is to find my correct spine if I make my shafts extra long can I put the weight on my shaft and keep moving it until I get the spine I need. Then consider that my center cut it to length...
  9. TradTalk Main Forum
    Hello, I'm new to archery, rented a couple times and trying to get my own equipment. Problem is, the style of shooting and a complimenting bow seems to be impossible to acquire. I've been scouring archery pages to find what bow would work best for a right hand thumb release target shooting. I...
  10. TradTalk Main Forum
    I've forgotten the dealer over in England that I visited quite a lot a few years ago....can someone help me on that dealership and the shipping was reasonable and the time span was quick......thanks Dave....
  11. TradTalk Main Forum
    Hi, Wish I had a chronograph, but will try using a high quality microphone near the bow and then record the sound on my computer. I'll try to find the brace height with the lowest noise levels. I'll compare this to my subjective evaluation. I might be able to get a rough idea of speed by...
  12. TradTalk Main Forum
    I put tape with a line at the mid point on my limbs at the fades, and hold the bow by the bottom limb and let the top limb rest above a door and look down the string and at the arrow. Try to line the string up with the marks on the tape on the limbs and keep the point of the arrow just to the...
  13. TradTalk Main Forum
    The last year has been an interesting experience getting into recurve - started with Hoyt Game Master II and Dorado, a Martin Hunter, Bernardini Mamba, Titan II / III and now the 3R Dalaa. Fortunately due to selling / trading I've managed to try a few bows and now settling into what I "like"...
  14. TradTalk Main Forum
    what is the correct method for finding the correct brace height when your mixing different ILF risers/ limbs? I particularly have a Morrison pheonix2 19" riser with tradtech black max extreme short limbs (27" draw). Didnt know if a risers recomended brace height is based on a particular make...
  15. TradTalk Main Forum
    Hello, My uncle in Alaska has been looking for these old videos his hunting club in Alaska used to watch many years ago. I'd like to identify them for him but also to see for myself. I'm sure many on here would like to see as well. He describes them like this. " Tearrow. Zen archer Dan Jordon...
  16. TradTalk Main Forum
    I have a samick skb and have no idea what the recommended range for the brace is supposed to be. Any ideas?
  17. TradTalk Main Forum
    It been nearly a year since I tried doing a factory "reset" on my form, technique, and overall shot execution. It felt like I was letting go of a not so firm handhold on a log in a fast moving river. If I had only known I was headed for some class 4 rapids, I might have held onto that old log...
  18. TradTalk Main Forum
    http://gameofthrones.wikia.com/wiki/Ygritte For the purpose of a costume I was wondering if someone knew where I could find a bow like that. It seems to be wrapped in like, thick leather or something and I can't seem to find any details on the web. Also, if it could actually shoot and work...
1-18 of 34 Results
Top