Trad Talk Forums banner
crawl
1-20 of 81 Results
  1. TradTalk Main Forum
    Long time since I posted. Getting back into archery after several years recovering from an accident. Been shooting a 45# Samick Sage, which I really like. Sort of hate to admit it since I have a DAS Elite, DAS Gen II and a DAS Tribute I can play with, as well as several DAS conversions done by...
  2. TradTalk Main Forum
    Hi all, I am new member from Finland and found this forum recently. Have been reading tons of great knowledge about archery👍 I have question: I have made myself a takedown recurve for hunting. It is short bow, only 59,5 inches nock-to-nock, and my draw lenght is 29,5 inches. Riser is 15", so I...
  3. TradTalk Main Forum
    Hi all, Great site and there is a wealth of knowledge on here. I'm a newbie getting into archery. I have a 17inch junxing Pharos 2/F261/Optimus Riser - junxing limbs 45 Lb 60inch bow 28 inch draw 7.5 inches brace height. Shooting off shelf. My fixed crawl for 20 m seems really long see...
  4. TradTalk Main Forum
    What would be the best rest options if i wanted to shoot a fixed crawl,3 under on a 19 in satori?
  5. TradTalk Main Forum
    I am trying out a fixed 20 or 25 yrd is crawl. So a few questions. This a 52# hunting rig with 610gr arrows that are 350 spine with 250 grains up front - 29.5” DL #1 - I am getting totally different arrow flight shooting right under the nock vs from my crawl position, (nock left / nock low)...
  6. TradTalk Main Forum
    I am curious whether anyone here uses (or thinks it might be useful) to combine a fixed crawl with instinctive/subconscious gapping type shooting. The theory being that because the gaps at hunting distances are much smaller with a fixed crawl, there is a more consistent sight picture for the...
  7. TradTalk Main Forum
    Quick question. Maybe a dumb one, but just want to be sure. Does the height of a target affect where your crawl should be? For example, if I’m testing out a crawl for 20 yards at a target at bow arm level, should the the same 20 yard crawl apply for a target on at ground level? Thanks! Demunds
  8. TradTalk Main Forum
    Hi all, I started playing with a fixed crawl on my 60” Morrison max 6 setup (15” riser, long limbs) and no matter what I do with the nock points, the arrow comes off quite nock low. It’s apparent from 5yds to 30yds so I don’t think it’s bouncing off the riser. My theory is that with my 31” draw...
  9. TradTalk Main Forum
    I posted this on another site, but wanted to share it here too. As an archer with a close to 32" draw arrows that are long enough for me to hunt with are hard to come by. This year I was shooting full length carbon express maxima blue rz's for 3D. Unfortunatly at only 31.5 inches from nock...
  10. TradTalk Main Forum
    I am interested in the crawl length and nock height setups that other people are running on their wood hunting bows. I am shooting a 15” 60” Wengerd Ibex via Lifecycle Gear. I followed my paper tuning results and ended up with bullet tears at 7/8 nock height and 1.25 inch crawl, measured from...
  11. TradTalk Main Forum
    Anyone ever have this issue? I’m bareshaft tuning and getting a nock low reading. This is with a fixed crawl. Never seen this shooting normal 3 under. I can actually see the shaft in flight with the nock lower than the point. Setup is as follows: WF19 riser shooting off the hump. Have adjusted...
  12. TradTalk Main Forum
    I spoke with a gentleman in the A&H booth at Kalamazoo in february. I am interested in his bows and I love the ACS system. However he seemed very hesitant about recommending his bows for someone using a fixed crawl. Now that I have found this method of shooting I have zero interest in using any...
  13. TradTalk Main Forum
    Wit a onepiece you can not adjust tiller by adjusting limbbolts. Is it possible to compensate for a crawl by adding more stringsilencer on the lower part of the string? //Peter
  14. TradTalk Main Forum
    I've said this before, but we have some new people here now, so I will quick revisit it in a way. I am going on a trad only hunt soon, so I dug out my hunting recurve and trying to get it tuned for off the shelf or springy. I'm going to stick with whichever one seems to be working the best for...
  15. TradTalk Main Forum
    So I watched The Push the other day and have been chewing on it for about a week now. What a wealth of information for a newbie like me. Matt presents the information in a way that emboldens the viewer to think, "hey, maybe this IS doable." I decided to go out and try the fixed crawl. I...
  16. TradTalk Main Forum
    Are there some "rules of thumb" for fixed crawl? What I mean is like this. Raise your anchor and you get x result at the target, or Y difference in crawl Longer arrow gives X, or Y Basically I'm thinking tuning guidelines. What started this is I believe my crawl is a little large. What...
  17. TradTalk Main Forum
    I need info about tiller adjustment on ilf recurve for fixed crawl shooting? I try some tiller and make loudly bow...
  18. TradTalk Main Forum
    First off I want to say thanks for bearing with me. I ask a lot of real basic questions but I am in new territory with ILF. So I am 35 yards point on. Should I be even tiller with a fixed crawl. I am shooting a new Morrison Phoenix 19 with XL longbow limbs, 50# at 32". I want my crawl to be 25...
  19. TradTalk Main Forum
    Well I shot with a fixed crawl tonight for the first time after Demmer suggested it to me a while ago. I was gapping but at 20 yards I was at the bottom of the bail which I would guess was 2 1/2 feet. John suggested a 1/2" crawl. I went with just the width of my index finger and that brought my...
  20. TradTalk Main Forum
    I have a DAS Tribute riser I shoot off of an AAE Free Flyt rest with an AAE Gold plunger and using an SRF sight. I've got another Tribute riser, this one is ILF, that I just bought and my plan is to keep it bare bow and shoot off the hump, probably still using a plunger. I would like to shoot...
1-20 of 81 Results
Top