Hi all, could someone please advise me on wooden arrows for my 1972 Damon Howatt Hunter 35#/28”. I cannot find manufacturers recommendations/limit, I don’t want to go too low, I draw 26” shooting to 55 yards max, field 3D only and like to be point on at 25-30 yards.

Per some of the very helpful comments on this site, I?m considering the CX Maxima Pro Recurve RZ for the upcoming indoor season. I would be very interested in any thoughts folks here have re what spine to get. I?m shooting barebow recurve (G2 riser with #32 K2 limbs). My draw length is...

When making plunger adjustments, at distance, 50-60 + yards, dealing with bare shaft and fixed plunger is done, arrows are fletched, given RH shooter and, given consistent grouping during walk back, with arrow falling left, weakening the spring is working to compensate for an arrow that is...

Hi all! I have been reading and learning from this site for some time now. Lots of good info here. It was time for me to join and participate... What better way than with a question? Anyways, a few months ago I picked up a vintage Razorback recurve, 0966-66". It need some finish work, which is...

how do you know you have correct alignment towards a target or animal? i was just curious how you know you are set up correctly towards your indicated target i have been working on this.

Hey guys, Just starting out in archery I've got a samick sage 50# recurve and my draw is 29". I got .400 spine arrows with my bow and managed to go ok with these, they came with aluminium inserts (unsure of weight), and 125gn points. When I had lost/broken a few and thought I needed some more...

Correct form for Manchu archery . . . (just in case you wanted to know . . . Qing Dragon II bow & 36" bamboo arrows) 🏹 John

Hello all, I am building my first set of arrows. They will be wooden footed walnut and pine. My question is to find my correct spine if I make my shafts extra long can I put the weight on my shaft and keep moving it until I get the spine I need. Then consider that my center cut it to length...

I'm about to buy my first plunger, having until now, simply shot off the shelf without one. The thing is, I will have to buy my plunger by mail order, as I don't live close to anywhere that sells them. Looking at the various websites, I have noticed that many plungers come in a variety of...

what is the correct method for finding the correct brace height when your mixing different ILF risers/ limbs? I particularly have a Morrison pheonix2 19" riser with tradtech black max extreme short limbs (27" draw). Didnt know if a risers recomended brace height is based on a particular make...

Found this bow advertised on Craigslist. Gave me a chuckle. I guess it might work like this but.........

Have a question as to correct draw length one should have... I’ve been shooting with a draw length and using 29 inch arrows on a 35# at 28 inches (60”) recurve for years. I shoot right handed. Just recently someone in the archery industry measured me and stated I have a 26.5” draw and should be...

Ok, a little back story... I'm new to archery, no experience with compound or recurve bows. My kids originally wanted to start shooting and I thought this would give us the opportunity to spend more time together. I've decided to get a 45# Samick Sage, read nothing but good reviews on this bow...

We all know that there are accuracy advantages to using a stabilizer and the correct arrow spine. This might be a theoretical question, but here goes: Say I don't want to change anything about my arrow, i.e., the spine, length, point weight, etc., are fixed. And say that the arrows pass the...

I have a samick skb and have no idea what the recommended range for the brace is supposed to be. Any ideas?

How much does or can a plunger correct for arrow spine? Must you have good spine prior to plunger adjustment?

Please correct me if my thinking is wrong. Given a longbow and a recurve of the same OAL say 60 inches I am thinking the longbow would have less finger pinch or a less sever string angle. Is this right?? Thanks, Jags