Trad Talk Forums banner
bushing
1-20 of 42 Results
  1. TradTalk Main Forum
    I just bought a takedown hybrid longbow to hunt pigs with in January. Before I start drilling and adding a stabilizer bushing for a gametracker and fishing rig I thought I’d see if there are any detachable bushings available. Surely someone makes something that’ll attach to the limb bolt or...
  2. TradTalk Main Forum
    I am trying to locate a pair of limb bolt bushing that go completely through the riser like Wes Wallace uses on his take downs. I have a Zipper ILF riser and the limb bolt inserts are not in straight. I want to drill them out and use the through type instead.
  3. TradTalk Main Forum
    I want to buy some uni bushings for my Easton xx75 game getter arrows 2016 spine. My not so near archery store said they have every other size except 2016, will any other size fit such as 2014 or any other size. How much larger or smaller could the bushings be....
  4. TradTalk Main Forum
    I want to replace an ILF bushing in one of my sets of limbs. I am wondering what the best way is to push the old bushing out. It is very tight and I hate forcing things until I know what I am doing. Also, is there a good way to push the new one in?
  5. TradTalk Main Forum
    I have two (pictured) bushing: 1.) 2.30" x 50 grains 2.) 0.93" x 12 grains Assuming a spine of: 1.) .600 2.) .500 How much difference I can expect from the two bushing in regards to the dynamic spine ? ? From each arrow (the .600 and .500). John
  6. TradTalk Main Forum
    This may have been discussed before but with several bowyers on this forum I’m looking for the definitive answer. What is supposed to be the limb stop (place of contact when the limb is slid onto the riser) on an ILF, the limb adjustment bolt/limb fork or the ILF bushing/dovetail? I have 2...
  7. TradTalk Main Forum
    I have a Tradtech Titan 1. The bushing/spacer that the limb bolt goes through vibrates when shot. When you back the limb bolt out is when it becomes loose. Is this normal?
  8. TradTalk Main Forum
    Hello all, I just got a new bow and was thinking of installing a bushing for a bow quiver. Maybe drill hole for a sight. I am not sure exactly how to go about this. I have been trying to find something online with no luck. I plan on using a drill press. What size bushing is standard? any tips on...
  9. TradTalk Main Forum
    Looking to mount Trad Tech ILF limbs to DAS riser (Das fittings). I see 3rivers has some, but the fitting instructions say TT (korean) hole has to be opened up..? http://www.3riversarchery.com/DAS+Limb+Bushing+(Border)_i8177-6_baseitem.html ----------------------- Lancaster also supplies...
  10. TradTalk Main Forum
    Anyone know what size g-unibushing will fit cx predator 800's
  11. TradTalk Main Forum
    Is there a reason that you still find non-threaded bronze sleeves used with ILF limb bolts instead of threaded (brass)? bushings? It seems free-floating would be more apt to rattle/creak than if they were threaded, although I realize even the threaded ones are free to move as the limb bolt is...
  12. Warfin' Wall
    Help, a little confused on whether to use limb bolt collar or flanged bushing for limb bolt?? Any benefit to one or the other? http://www.lancasterarchery.com/salesperson/result/?q=Ilf+bushing Thanks-Lobo
  13. Warfin' Wall
    Help, a little confused on whether to use limb bolt collar or flanged bushing for limb bolt?? Any benefit to on or the other on a DAS warf? http://www.lancasterarchery.com/salesperson/result/?q=Ilf+bushing Thanks-Lobo
  14. TradTalk Main Forum
    I recently purchased some hoyt gold medalist limbs that the ilf hardware had been removed. I purchased the tradtech replacement gear and pressed the fittings in. The fittings pressed in fairly easy with the heal of my hand on a flat surface. The screws that hold the detent in place are not the...
  15. TradTalk Main Forum
    Hello guys! I need das bushings, and have a couple questions. I have a set for borders, what is the difference in length? Where is the best place to get standard das bushings? Longshot question here, will standard work for Centaur ilf longbow limbs? Thanks in advance! Have a great day, Kasey...
  16. TradTalk Main Forum
    Does anyone have pictures of how to do the ILF to Hoyt GM/Dorado bushing conversion? I've actually done it years ago without a vice and had a step by step procedure with pictures but I can't find it. Thanks!
  17. TradTalk Main Forum
    I do this and wrap it on clockwise so the end of the tape doe's not bind against the bushing threads when I twist the bushing back on after taping. I like the thicker Gas line tape because it does no shred as easily.
  18. TradTalk Main Forum
    LAS have been out of stock for 2+ months and each time I call, they say its "unknown" when they're back in stock. Are there any other "off the shelf" sources? I'm not in a position to make my own since all my tools are several thousand miles away and locating supplies is far from ideal in...
  19. TradTalk Main Forum
    which ones are the longer of the 2?? Korea/Hoyt or Border???
  20. Warfin' Wall
    See Steve and all others, the shaft just slides on the bolt. So when I back the bolt out just a little it crates the gap, Not sure what I should use to make it done the right way?
1-20 of 42 Results
Top