Trad Talk Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 144 Results
  1. DIY Projects
    Part 1 - This is a project I started last year and put aside for a while as I got busy with other stuff... Picked it up again last week and finished a set of 3 kydex sheaths for my Magnus Stinger Broadheads as I think it's a great idea. My intention was to create a design that I could mount of...
  2. Archery Accessories
    Have 5 right bevel Cutthroat screw-ins and one VPA Penetrator for sale. All are 250gr. One Cutthroat shot into 3d target for practice. Can't buy these Cutthroats at RMS right now. $125tyd for all 6. Only dealing with folks who have good feedback or high post count.
    $125 USD
  3. Archery Accessories
    Looking for a source of the screw on weights to make a 175-200 grn DRT broadhead.
  4. TradTalk Main Forum
    I hunt with 43-46# bows and always end up with an arrow weight of about 9.5 gpp. I am always in the 405-420 range. Currently I am shooting 43# and 405 grains. I have no issue with penetration using a two blade head I just would like a little more blood trail. I limit my shots and only take...
  5. Archery Accessories
    I bought it from Innovative Outdoorsman. Used it once on one blade. It works, but it's not for me. Plus I'm switching to a 3-blade broadhead and this won't work for that. Comes with wet/dry sand paper pack of 5 different grit sandpaper. I used one piece of the pack. List price is $29.50 for...
  6. TradTalk Main Forum
    Seen a few videos of this being used and it looks like a great tool for sharpening both fixed blade and replaceables. 1. Anybody used one? 2. Don't seem to be for sale anywhere, are they discontinued? 3. If you use something else, please advise what you like the best. Thanks!
  7. TradTalk Main Forum
    Okay whats the best broadhead target for the money.
  8. TradTalk Main Forum
    This is my second year with a recurve and I'd like to change broadheads. I used the stinger broadheads last year but I'm unhappy with the durability. It's very rocky where I hunt, almost a guarantee I'll hit one. Can anyone suggest a single bevel fixed blade broadhead around 175 gr that could...
  9. TradTalk Main Forum
    Because broadhead tipped arrows have a bigger cross-section than field point tipped arrows, I'm guessing that broadheads drift a bit more in a cross wind than field points. Any thoughts? Has anybody tested this?
  10. TradTalk Main Forum
    Brothers in arms, need your advice. In the process of tuning my HEX8’s for hunting, I’m having some issues. As you can see from the bareshaft/fletched with pink 4x3’ from 18meters, they fly like I want them to. The bareshaft slightly weak and nock high. With either broadhead and 4x4’ feathers, I...
  11. Hunting Camp
    I recently bought some Muzzy replaceable blade broadheads. In the package was one set of these "blades" and the expected amount of normal blades. The diamond shaped "blades" aren't sharp but weigh the same as the real blades. I couldn't find any thing on the packaging saying what they are for...
  12. Hunting Camp
    Hey all, I’m off to Montana this year for elk and mule deer. Plan on taking my Covert Hunter at 50# with 575gr arrows. I shoot 125gr fieldpoints with 75gr brass inserts in a FMJ arrow. Which broadhead do you recommend please?
  13. Hunting Camp
    How important is it two align the Broadhead (grizzly single bevel) to the feather fletching? I’m shooting Easton legacy’s and when the Broadheads are fully screwed in they vary on which way they align how much will this affect flight and what would be a good or easy fix to adjust the Broadhead...
  14. TradTalk Main Forum
    So I cannot get my Broadheads sharp for the life of me. I have tried a few different techniques. Most recently a think you clamp your knife/Broadhead in that comes with 4 stones. Basically it has guides to help get the perfect angle. The stones have a rod that slides into a hole to guide it at...
  15. TradTalk Main Forum
    Going to buy a target to shoot broadheads at. Anyone have any recommendations of ones that are a good bang for the buck? Or let me know ones to stay clear of. Just looking for something simple I can move around and be sure my arrows fly straight. There are so many on the market...
  16. TradTalk Main Forum
    Are you Suppose to align broadheads vertical or horizontal ?
  17. TradTalk Main Forum
    So I had my friend Cody sharpen up some Zwickeys he graciously purchased and sent my way. These are the glue on models, and what real trad men shoot on wood arrows. These arrived in a manly package secure, so no postmen or women would be harmed by simply looking at, or handling the package. I'll...
  18. TradTalk Main Forum
    So?...having (10) of a dozen (2 fell victim too a robin-hood moment) 29" .350 spine CX Mayhem Hunter shafts laying around and knowing they were too stiff for either my 64"/38# Hex7.5 CH or my 64"/45# Border Hawk Hybrid and?....since I had a 6-pack of unopened 160gr STOS 2-Blade Glue-on...
  19. TradTalk Main Forum
    Prior to season I asked how everyone treats heads to preserve the edge. Joe P suggested Sentry TUF-GLIDE. I have hunted with the double bevel Grizzly heads treated with Sentry this season. I've hunted in rain, hot and cold temps. I have pulled and reloaded the same arrow many times. The...
1-19 of 144 Results
Top