ButchD
08-05-2007, 01:00 PM
Black Bear Warf,Proline Typhoon Warf, Samick universal carbon, 36#70"
True Draw is measurement from arrow nock to plunger or pivot point at draw. AMO is True Draw + 1 3/4", or, arrow nock to far side of riser at draw.
Limb bolts are tight.
Black Bear Proline
True Draw length AMO | AMO length True Draw
38# 26" 35# | 39# 26" 43#
40# 27" 37# | 41# 27" 45#
42# 28" 38# | 43# 28" 47#
Weights checked with a Cardoza hand scale.
So, if your true draw is 28", with the Samick limbs 36#@70":
You would expect to draw 42# with the Black Bear, or a 6# gain
You would expect to draw 47# with the Proline, or an 11# gain.
True Draw is measurement from arrow nock to plunger or pivot point at draw. AMO is True Draw + 1 3/4", or, arrow nock to far side of riser at draw.
Limb bolts are tight.
Black Bear Proline
True Draw length AMO | AMO length True Draw
38# 26" 35# | 39# 26" 43#
40# 27" 37# | 41# 27" 45#
42# 28" 38# | 43# 28" 47#
Weights checked with a Cardoza hand scale.
So, if your true draw is 28", with the Samick limbs 36#@70":
You would expect to draw 42# with the Black Bear, or a 6# gain
You would expect to draw 47# with the Proline, or an 11# gain.